All I can say is these things are a great value.  They have a "get both stands" deal for $99.  By default it has rubber pads on the rear stand, but for a few dollars you can pick up the spooled attachment.  The quality is great for the money.  The front is alittle sketchy to me but effective none the less.  The ends are like a cone with a 1/2" pin in the tip.  You line them up under the holes in the bottom of your forks and press down, lifting the bike.  The front needs to be used with the rear as the bike will flop around on the front alone.  The CBR 929rr actually has a special rear stand just for it, problem is that you don't get the $99 deal if you get the 929 specific stand and you'll pay more around $170 for the pair.  The reason for the special 929 stand is that the swingarm isn't even across the bottom, so with the generic stand the bike will lean to the right.  It won't tip though, I used the generic stands for a year and never had an issue other than the bike sitting a hair crooked.  The 954 swingarm has spooled inserts on it so you can see it in this picture using those and sitting level.  They are a great deal if you're looking for a cheap set of stands, for the money nothing touches them.

Handy Industry cycle stand page (remember the $99 deal)